Get White List Addresses

Hi Josh,
I don't think this is accessible in the application layer. I only see the HCI_LE_ReadWhiteListSizeCmd which will return the total number of records that can be stored in the white list.

Why would you want to know this?

Because there is no way to remove one address from the list unless you store all of the addresses in NV storage and hope they remain in sync. in Pairing/Bonding it is possible to get access to all the stored records, but not in WhiteList.

There is the HCI_LE_RemoveWhiteListCmd API but you would have to know the address and address type beforehand.

Assuming you are synching the whitelist with bonded devices, you can look through the bonded devices. See the gapBondMgr_SyncWhiteList() for an example.

Another option is to read the addresses directly from flash using osal_sn_read using the ID's defined in bcomdef.h:

// Bonding NV Items - Range 0x20 - 0x5F - This allows for 10 bondings
#define BLE_NVID_GAP_BOND_START 0x20 //!< Start of the GAP Bond Manager's NV IDs
#define BLE_NVID_GAP_BOND_END 0x5f //!< End of the GAP Bond Manager's NV IDs Range