Sample Code to read data back to an iOS device

Gautham

Other Parts Discussed in Thread: CC2650

Hi,

I was able to transmit 20bytes of data to the CC2650 from an iPhone by modifying the register service and an old iPhone app.

I was wondering if there are any examples to read back data from the CC2650 on to the iPhone.

Thanks,

Gautham Ramachandran

Apps. Engineer - Haptics.

over 10 years ago

0 Tim C over 10 years ago

TI__Mastermind 34660 points

Hello. Assuming the iPhone is functioning as a GATT Client, you can use any of the Bluetooth-defined GATT client commands such as GATT_ReadCharValue. The TI versions of these commands are described in the software developer's guide.

However, you'll be looking for the iOS API's.

0 Gautham over 10 years ago in reply to Tim C

TI__Genius 12485 points

Thanks Tim.. Anywhere I can find the old Sensortag Example iOS code?

thanks,

Gautham Ramachandran

0 Tim C over 10 years ago in reply to Gautham

TI__Mastermind 34660 points

We had to pull it due to some Apple restrictions. There is an updated app being worked on now. When available, it will be posted here: www.ti.com/.../sensortag2015;HQS=sensortag

Bluetooth®︎

Bluetooth forum

Sample Code to read data back to an iOS device