CC2640 HCI and Linux

YC Poon

Prodigy 210 points

Other Parts Discussed in Thread: CC2640, CC2540, BLE-STACK

Hi there,

Just want to know if Linux BlueZ supports CC2640 with HCI firmware?

--YC

over 10 years ago

0 YiKai Chen over 10 years ago

Guru 735695 points

You can refer to genuinepulse.blogspot.fi/search and see it works on CC2540. The HCI command of CC2640 and 2540 is the same so it supposes to work.

0 JXS over 10 years ago

TI__Guru** 105180 points

Hi,

This is not a supported config with the SDK since the CC2640 uses the TI BLE-Stack. If you adapt the BlueZ to support TI Vendor Specific commands, it may work. Please let us know if you get it working!

Best wishes

Bluetooth®︎

Bluetooth forum

CC2640 HCI and Linux