BT-AUDIOSINK

Christian Siegele

Hello,

i just bought the TI BT-AUDIOSink eval Board and the MSP430FET Debugger. I am using the latest Version of the iar msp40 tollchain.

Each time i am trying to download sample projekt a3dpdemo sink the following error Message appears:

Fatal Error: External Voltage too low: 1.6V

Session aborted

Does anyone know how to fix this Problem?

0 Joseph Gigi over 10 years ago

Hi,

Please verify the Jumper/Switch positions - processors.wiki.ti.com/.../CC256x_Audio_Sink_User_Guide

Regards,
Gigi Joseph.

0 Christian Siegele over 10 years ago in reply to Joseph Gigi

All Jumpers / Switches are in their Default possitions. But now i get another error message:

Could not finde Device (or device not supported)

0 Joseph Gigi over 10 years ago in reply to Christian Siegele

Hi,

Can you verify if you have the correct configuration? "A3DP SNK Board"

Regards,
Gigi Joseph.

0 Christian Siegele over 10 years ago in reply to Joseph Gigi

Yes. I did everthing according to the user guide you mentioned before. There is still the same error message

Bluetooth forum