Best way to RF test CC2541

Eyal Lasko

Expert 2300 points

Other Parts Discussed in Thread: CC2541

Hi,

What would be the best/easiest way to RF test proprietary BLE CC2541 sensor?

1. As described at: .

2. Using RF studio to directly setup the RF parameters. (couldn't find any reference to Testing this way)..

Many thanks in advance.

0 CHS over 10 years ago

What do you mean by proprietary BLE, are you running the BLE stack? Anyway, either option will work fine, it is more or less up to you:)

0 Eyal Lasko over 10 years ago in reply to CHS

Expert 2300 points

Proprietary as in 'not exact clone of TI ref design' (hardware-wyse) .

The BLE stack used is TI v1.4 (with 'proprietary' profile).

Thanks.

0 YiKai Chen over 10 years ago in reply to Eyal Lasko

Guru 735685 points

I suggest you to use SmartRF Studio to check TX/RX performance of your own HW design.

Bluetooth forum