getting early device address CC2640 / cc2650

m w

Other Parts Discussed in Thread: CC2640

I am trying to get the bluetooth address of the CC2640 early in the startup sequence (before GAPRole_StartDevice is executed). I know you can normally use GAPRole_GetParameter but it only returns 0 before GAPRole_StartDevice is executed. Any advice?

over 11 years ago

0 JXS over 11 years ago

TI__Guru** 105180 points

Hello,

You an read the BLE MAC Address (BD_ADDR) from the Flash info page: 0x500012E8. See the SmartRF Flash Programmer 2.

Best wishes

0 m w over 11 years ago in reply to JXS

Intellectual 360 points

Thank you that got me pointed in the right direction. This is referenced in SWCU117B CC26xx SimpleLink™ Wireless MCU Technical Reference Manual section 9.2 Factory Configuration

0 Atul Priyadarshi over 9 years ago in reply to JXS

Intellectual 845 points

Can this be done using coding.

How do I read from the Flash info page using code.

Bluetooth®︎

Bluetooth forum

getting early device address CC2640 / cc2650