CC2650 Dead after first flashing using CCS Cloud

Wilmar Campos

Other Parts Discussed in Thread: CC2650

Hi All,

I am very happy to be testing the cc2650 sensortag that I just received. After severals attempts trying to run CCS on my mac, I had to run it from my windows partition.

The problem I have is after flashing the first time with SensorTagAPP demo from the TI Resource Explorer.

Now, the question is, how do I get back my board?

I try removing the battery, but nothing happen with I put it back.

Please any help is appreciated.

over 10 years ago

0 Joseph Gigi over 10 years ago

TI__Guru* 85400 points

Moving this to "Bluetooth Low Energy Forum"

Regards,
Gigi Joseph.

0 Srey Seng over 10 years ago

Prodigy 70 points

I had a similar issue. Did you build the SensorTagStack AND SensorTagApp projects? You need to build both projects and then flash the SensorTagStack first, and then flash the SensorTagApp next. This solved the issue for me.

You can also download Flash Programmer 2 from the ti website and wipe the image clean, then flash to current FW to get the cc2650 sensortag running again.

0 JXS over 10 years ago in reply to Srey Seng

TI__Guru** 105180 points

Hello,

There is a prebuilt hex fw file in the BLE Stack v2 SDK under Accessories/HexFiles. You can program this with the DevPack Debugger.

Best wishes

0 Srey Seng over 10 years ago in reply to JXS

Prodigy 70 points

I can flash the cc2650 sensor tag with the provided sample FW from CCS Cloud, BUT I find that there's only 9 available services instead of 11 and accelerometer no longer works. I have tried this on a few different cc2650 sensor tags....any ideas?

Bluetooth®︎

Bluetooth forum

CC2650 Dead after first flashing using CCS Cloud