CCS V6.1 build demo code and get error

Hi Kobe,

Can you please paste the whole error? "error #10234-D:unresolved symbols remain" - indicates a missing library. The earlier error that you attached indicated a memory error.

Regards,
Gigi Joseph.

0 Kobe Pei5 over 10 years ago in reply to Joseph Gigi

Prodigy 150 points

Hi
as below

Description Resource Path Location Type
#10010 errors encountered during linking; "A3DPDemo_SNK.out" not built A3DPDemo_SNK C/C++ Problem
#10099-D</a> program will not fit into available memory. placement with A3DPDemo_SNK C/C++ Problem
#10234-D</a> unresolved symbols remain A3DPDemo_SNK C/C++ Problem
unresolved symbol _data20_read_char, first referenced in ./BTPSVEND.obj A3DPDemo_SNK C/C++ Problem

0 Joseph Gigi over 10 years ago in reply to Kobe Pei5

TI__Guru* 85400 points

Hi,

For the _data20_read_char error,

Could you please change the
*Dest++ = _data20_read_char((*Source)++);
to
*Dest++ = __data20_read_char((*Source)++); and try

and see if it helps?

Regards,
Gigi Joseph.

0 Kobe Pei5 over 10 years ago in reply to Joseph Gigi

Prodigy 150 points

Yes. Error message become 2 items.

log_and_error.zip

0 Joseph Gigi over 10 years ago in reply to Kobe Pei5

TI__Guru* 85400 points

Hi,

Thanks. I would also get the same error if I build "A3DPDemo_SNK" with CCS. As mentioned earlier, the "A3DPDemo SNK Demo" is not supported with CCS, please use IAR to build.

Regards,
Gigi Joseph.

0 Kobe Pei5 over 10 years ago in reply to Kobe Pei5

Prodigy 150 points

Hi
The other demo only left warning!!

Bluetooth®︎

Bluetooth forum

CCS V6.1 build demo code and get error