UART -ECHO -SAMPLE PROJECT

Akshay Ravindran

http://processors.wiki.ti.com/index.php/CC2640_NPI_UART_ECHO_EXAMPLE

http://processors.wiki.ti.com/index.php/Cc2640_Adding_a_UART_or_SPI_driver_to_a_Sample_Project

when i tried implementing the UART Functionality to my project by following both the above mentioned wiki pages, i encountered the same error .Can someone tell me as to why the error keeps on coming????

over 10 years ago

0 Christin Lee over 10 years ago

TI__Guru 57005 points

hi,

with respect to the links, as stated in the wiki page, it only works for BLE stack 2.0 for the moment.

This wiki will add basic UART echo functionality by modifying the NPI task. Please note that this example is currently being ported to BLE Stack v2.1 but only supports v2.0 as of this writing.

0 Akshay Ravindran over 10 years ago in reply to Christin Lee

Intellectual 380 points

I was able to get it working by changing the parameter in the npi_rxbuf.c

Bluetooth®︎

Bluetooth forum

UART -ECHO -SAMPLE PROJECT