CC2650 UART Master example

Feras Qammou

Expert 2080 points

Hi, I am based on the simpleBLEPeripheral example, I need to make communication as a master via UART with other MCU,

where can I have example for that?

Thanks.

over 9 years ago

0 Sean2 over 9 years ago

TI__Mastermind 33460 points

Hi,

We have lots of examples that cover adding UART to our example projects such as SimpleBLEPeripheral. You can find them by going to our Wiki page (processors.wiki.ti.com/.../Category:BluetoothLE and then clicking on the Adding Serial Communication (UART or SPI) to A Sample Project link.

0 Feras Qammou over 9 years ago in reply to Sean2

Expert 2080 points

Thanks :)

0 Feras Qammou over 9 years ago in reply to Sean2

Expert 2080 points

I am trying to find an example of how to add the uart to the RTOS but I find only description about functions!
file:///D:/ti/tirtos_simplelink_2_13_00_06/docs/doxygen/html/index.html
I read all links from here related to UART.
can I have a simple example for hou to add to the simpleBLEPeripheral project the UART and to have it works writing and writing?

Thanks.

0 Sean2 over 9 years ago in reply to Feras Qammou

TI__Mastermind 33460 points

file:///C:/ti/tirtos_simplelink_2_13_00_06/docs/doxygen/html/_u_a_r_t_c_c26_x_x_8h.html has some code snippets that Use the UART driver in different configuration. We have examples for adding UART to simplebleperipheral on our wiki (processors.wiki.ti.com/.../Category:BluetoothLE) under the article about adding serial to a sample project.

0 John Pocreva over 8 years ago in reply to Sean2

Intellectual 905 points

This link doesnt work. Where is this example currently stored?

Bluetooth®︎

Bluetooth forum

CC2650 UART Master example