• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 51 subscribers
  • Views 443 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2541 Health Thermometer Reading Help

Michael Robinson93
Prodigy 145 points
Other Parts Discussed in Thread: CC2541

Hello everyone,

I have the CC2541 Mini-DK with the health thermometer profile programmed onto the CC2541 keyfob

However I am stuck here (first time with BLE) and I am not sure how to get temperature values back from the keyfob to my BTool on my laptop

Any guidance/help is appreciated.

Thanks,

Tom 

  • 0
    TI__Guru** 105180 points
    Hello Tom,

    Welcome to BLE! It would probably be helpful to go through the SW Developer's Guide to better understand BLE. This will get you the basis for a starting point to debug your setup with the CC Debugger.

    Best wishes