CC2650STK + XDS100V2

RAMON RAMIREZ

Other Parts Discussed in Thread: CC2650STK, CC2540

i am trying to use a sensortag cc2650STK with a XDS100V2 from Blackhawk but i can't turn on the sensortag...XDS100V2 is working and the CC2650STK work correctly with batteries but when I try to turn it on with XDS100V2 nothing happens

please help me..

Best regards

over 10 years ago

0 Sean2 over 10 years ago

TI__Mastermind 33460 points

Hi Ramon,

Have you tried to remove the battery from the STK while programming using the Blackhawk XDS100v2?

0 RAMON RAMIREZ over 10 years ago in reply to Sean2

Intellectual 350 points

yes . I also have the keyfob cc2540 and I remember that I had to put a jumper on two terminals when connecting the debugger and so was enabled... This sensortag won't have something similar?

0 Sean2 over 10 years ago in reply to RAMON RAMIREZ

TI__Mastermind 33460 points

Hi Ramon,

Yes you do remember correctly, however the STK doesn't have a similar requirement. Have you checked the pinout of the Blackhawk and STK to ensure you're connecting correctly?

0 Sean2 over 10 years ago in reply to Sean2

TI__Mastermind 33460 points

Hi Ramon,

I'd like to invalidate my previous responses. The XDS100v2 is not supported, only the XDS100v3.

Please see here processors.wiki.ti.com/.../CC13xx_CC26xx_Tools_Overview

I apologize for any confusion.

Bluetooth®︎

Bluetooth forum

CC2650STK + XDS100V2