Cc2650 booster pack : which form factor ? How much is it ?

christophe onillon

Intellectual 540 points

Other Parts Discussed in Thread: CC2650

hi,

please can You communicate price ?

if i order the first one ?

please add cc debugger engineering sample ;->

according to the announce, may i permit to provide my advive on my experience:

provide a micro/nano form factor with similar connector than the sensor tag (keep debugger on)

create a daughter board to put it on and permit standard booster pack.

include grove connector (i2c adc and numeric i/o).

find a partner able to pass ideas Customer from standard booster pack to nano booster pack

keep Small form factor stackable to integrate them easily.

Christophe

over 9 years ago

JXS over 9 years ago

TI__Guru** 105180 points

You can find design files on how to create your own DevPack on the SensorTag site: www.ti.com/sensortag. Under the DevPack tab, you'll find info on how to connect with manufacturers / ODMs who can help you fabricate the booster pack for your custom design.

For booster packs, the process is similar to DevPack's. See the LaunchPad site on ti.com for more info

Best wishes

Edit: Correct DevPack vs. Booster Pack.

Fredrik K over 9 years ago

TI__Guru** 106705 points

Hi Christophe,

I assume you ask about the upcoming CC2650 LaunchPad I mentioned in your other thread. This will be the same size as the existing MSP LaunchPads with the same BoosterPack breakout headers. It will include an onboard XDS110 debugger.

The DevPacks for the SensorTag will not fit on the LaunchPad, however all other Boosterpacks will.

As for price, I am not sure, but it should be in the same range as SensorTag + DevPack Debug.

Cheers,

Fredrik