• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 52 subscribers
  • Views 722 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2564 protocol issue

Ray Hsu
Expert 1330 points

About CC2564, want to confirm a few problems:
1 PCM interface can only walk HFP (profile hands-free) protocol?
2 PCM interface can take the A2DP protocol?
3 or A2DP protocol can only take I2S or UART.

  • 0
    TI__Guru* 85400 points
    Hi,

    Please take a look at the datasheet Figure 3-16 & Figure 3-17.

    The A2DP audio exchange is via the UART. The device also supports an assisted mode (A3DP) which does the decoding in the controller side, and provides the audio via the PCM/I2S interface.

    Regards,
    Gigi Joseph.