simpleBLEPeripheral LCD not working

There is an SensorTagDevPk project file (under C:\ti\simplelink\ble_cc26xx_2_01_00_44423\Projects\ble\SensorTag\CC26xx\IAR) which is for CC2650STK + LCD devpack.

When I download the sensortag project, the LCD is working. But why doesn't it work for simpleBLEPeripheral project?

SimpleBLEPeripheral doesn't implement LCD driver and application for LCD devpack.

The below piece of code was there in the "simpleBLEPeripheral.c" file .

 // Display device address

       LCD_WRITE_STRING(Util_convertBdAddr2Str(ownAddress), LCD_PAGE1);

       LCD_WRITE_STRING("Initialized", LCD_PAGE2);

     }

     break;

   case GAPROLE_ADVERTISING:

     LCD_WRITE_STRING("Advertising", LCD_PAGE2);

     break;

Doesn't this mean that LCD can be implemented in simpleBLEPeripheral project?

This is for LCD on SmartRF06EB and the driver is different to LCD devpack.

Is there a way that I can add drivers from sensortag project to simpleBLEPeripheral project? What steps should I follow?

You can try to refer to processors.wiki.ti.com/.../CC26xx_LCD.

Again that ends up in SensorTag project. :/