CC2650 - red led blinking continously. Not able to flash

Poorani sivaraj

Hi,

I have flashed the BLE tag(4.1) with application file followed by sensor stack using smart flash programmer 2 due to which the red led is glowing continously. Even if i erase completely and flash with stack first followed by application i do not see any changes with the red led. Please guide me with it

over 9 years ago

0 YiKai Chen over 9 years ago

Guru 735685 points

What do you mean BLE tag(4.1)? And which BLE example do you flash into it?

0 Poorani sivaraj over 9 years ago in reply to YiKai Chen

Prodigy 20 points

Hi,
It is Simplelink BLE Sensor tag. i have couple of BLE tags. Only the one is not working fine but the rest are working fine. I am sorry i am not able to provide details regarding application because i am not involved in its development.
All the application does is to advertise.

I am able to flash and it shows success. The only problem is "red led is glowing" and "there is no advertisement from tag" with this particular tag whereas the rest of the tags are advertising for the same application.

0 JXS over 9 years ago

TI__Guru** 105180 points

Hello,

Please refer to the SensorTag User's Guide on the BLE Wiki.

Best wishes

Bluetooth®︎

Bluetooth forum

CC2650 - red led blinking continously. Not able to flash