Can CC2650 used in both bluetooth and Zigbee requirements?

user4594443

Other Parts Discussed in Thread: CC2650

I want to choose a chip which can certified clients ID through bluetooth, and this ID information can upload to net by Zigbee. The ID information should not be break though the transmission. Can CC2650 competent this job? anyother solution?

over 9 years ago

0 YiKai Chen over 9 years ago

Guru 735685 points

Do you mean to run both BLE and Zigbee on CC2650 at the same time? If yes, it is not possible. If not, can you elaborate?

0 user4594443 over 9 years ago in reply to YiKai Chen

Prodigy 70 points

first, the client's ID transmitted to cc2650 by bluetooth, then cc2650 certified this ID , and then the ID transmitted to net by zigbee.

0 YiKai Chen over 9 years ago in reply to user4594443

Guru 735685 points

This sounds you mean to run both BLE and Zigbee on CC2650 at the same time, and it is not possible.

0 user4594443 over 9 years ago in reply to YiKai Chen

Prodigy 70 points

anyother solutions? if not use zigbee, such as wifi/nfc?

0 user4594443 over 9 years ago in reply to user4594443

Prodigy 70 points

Can I use two chip together to achieve this goal? and which two should I choose?

0 YiKai Chen over 9 years ago in reply to user4594443

Guru 735685 points

If you accept two chips solution, you can use www.ti.com/.../TIDC-BLE-TO-WIFI-IOT-GATEWAY.

0 user4594443 over 9 years ago in reply to YiKai Chen

Prodigy 70 points

thanks, I will have a try

0 YiKai Chen over 9 years ago in reply to user4594443

Guru 735685 points

You are welcome.

Bluetooth®︎

Bluetooth forum

Can CC2650 used in both bluetooth and Zigbee requirements?