Regarding CC2541 BLE

Amar sainath T

Other Parts Discussed in Thread: CC2541DK-MINI, CC2541

Hello,

We have CC2541DK-MINI wireless development kit. I used initially with the preprogrammed key fob code. I could see the data flow from the keyfob to the BLE dongle.Recently I flashed the sensor tag program in the keyfob. Now the red LED on the keyfob is glowing always.

Again I flashed with the actual keyfob program into the keyfob, but I am unsuccessful, still red LED is glowing i.e., it is used to advertise( OUT OF THE BOX).

Please suggest me what shall I do to make the keyfob to advertise.

Thanks

T.Sainath

over 10 years ago

0 YiKai Chen over 10 years ago

Guru 735695 points

You can try to download CC2541_keyfob_SimpleBLEPeripheral.hex under \BLE-CC254x-1.4.1.43908\Accessories\HexFiles to your keyfob and test again.

0 Amar sainath T over 10 years ago in reply to YiKai Chen

Intellectual 310 points

Hello,

The red LED stopped glowing, but it is not advertising.I couldn't find it in Btool (slave BDA).

Thank You

Sainath

0 YiKai Chen over 10 years ago in reply to Amar sainath T

Guru 735695 points

Check if battery is power good.

Bluetooth®︎

Bluetooth forum

Regarding CC2541 BLE