TI RTOS upgrade to 2.15.00.17 (BLE stack 2.1.1)

Priya Nadathur

Other Parts Discussed in Thread: BLE-STACK

We are trying to decide if we should upgrade to TI RTOS 2.15.00.17. The BLE stack v2.1.x - TI RTOS 2.15 Porting Guide

on the BLE wiki page mentions bug fixes to the UART and SPI drivers. Can you elaborate what these bug fixes were?

The porting guide also says this TI RTOS version has not been tested with the current BLE stack. Is there a date by which t

his testing will be complete?

Thanks,

Priya

over 9 years ago

0 JXS over 9 years ago

TI__Guru** 105180 points

Priya,

There is a release notes file in the TI-RTOS installation with details on bug fixes applied to that release.

The upcoming BLE-Stack v2.2 release with BT core v4.2 support (early summer) will use the newer 2.16 TI-RTOS release.

Best wishes

0 Priya Nadathur over 9 years ago in reply to JXS

Genius 4355 points

Thank you for your reply.
I looked at the release notes on this link:
software-dl.ti.com/.../release_notes_tirtos_cc13xx_cc26xx_2_15_00_17.html

tidrivers_cc13xx_cc26xx_2_15_00_26 -- this link lead to a page not found. Is this where the info about UART and SPI bug fixes are available?

•cc26xxware_2_23_00_16374 -- these release notes are available.

Thanks,
Priya

0 Sean2 over 9 years ago in reply to Priya Nadathur

TI__Mastermind 33460 points

Hi Priya,

You can reference the cc26xxware release notes here:
processors.wiki.ti.com/.../CC26xxWare

In general, unless you are seeing any issues. I would recommend using the RTOS version currently bundled with the BLE-Stack SDK (v2.13.00.06) until the BLEv2.2 SDK is released.

Bluetooth®︎

Bluetooth forum

TI RTOS upgrade to 2.15.00.17 (BLE stack 2.1.1)