CC2541 BLE Device Monitor OAD service error...

WooSeok Nam

Intellectual 460 points

Other Parts Discussed in Thread: CC2541, CC2540

Hi friends~

First of all, I am sorry I did not speak English well.... OTL..

I hope to OAD service on CC2541 & CC2540.

CC2540 is connect to PC and BLE Device Monitor.

and CC2541 is programming and append the BIM, SimpleBLEPrephral(ImageA).

CC2540 is send data SimpleBLEPrephral(ImageB).

and CC2541 is receive data and update Image (A->B).

what is sequence...?

and what is this error on BLE Device Monitor!?

i dont understand OAD CC254x file ...

help me, friends... plz.......

over 10 years ago

0 Tim C over 10 years ago

TI__Mastermind 34660 points

Hello. You can find all necessary OAD information and instructions in the OAD guide: processors.wiki.ti.com/.../File:Over-the-Air_Download_for_CC254x.pdf

0 Tim C over 10 years ago in reply to Tim C

TI__Mastermind 34660 points

I'm not sure what your error is but I would recommend following the steps in the guide to see if you can get it working.

0 WooSeok Nam over 10 years ago in reply to Tim C

Intellectual 460 points

hi Tim!

thanks for your comment.

but i don't understand your answer..

i'm following the OAD guide.

then, change question.

how many "hex" file get the "OAD" guide?
i get 3 hex file. (BIM and ImageA and ImageB)
and cc2541 programed BIM and append ImageA.
and want to send the ImageB.

is it right??

additionally, how can i control the button?

SimpleBLEPrephral Button is P0_1. but i want P1_1... plz..

Bluetooth®︎

Bluetooth forum

CC2541 BLE Device Monitor OAD service error...