Cc2650 Debug error XDS

SkyMan

Other Parts Discussed in Thread: CC2650, CC2650STK

Hi,

I have a problem, i can't debug again.

With CCS :

Error connecting to the target:
(Error -242 @ 0x0)
A router subpath could not be accessed.
The board configuration file is probably incorrect.
(Emulation package 6.0.228.0)

on XDS 110USB Debug

And with Flash Programmer 2, i can't detect the sensortag.

over 9 years ago

0 SkyMan over 9 years ago

Expert 1275 points

When i refresh on flash programmer2 and i try to Forced mass erase, i have :
>Initiate access to target: XDS-L3000949.
>Create XBAL object failed: Target connect failed
>Failed to create device object.
I can't use my sensortag CC2650 :(

0 YiKai Chen over 9 years ago in reply to SkyMan

Guru 735695 points

1. Disconnect CC2650STK from CC-DEVPACK-DEBUGGER first.
2. Connect CC-DEVPACK-DEBUGGER with USB cable to your desktop and start Flash Programmer 2.
3. Connect CC2650STK to CC-DEVPACK-DEBUGGER and press "Refresh" button on Flash Programmer 2 to see if it recognizes CC2650STK.

0 SkyMan over 9 years ago in reply to YiKai Chen

Expert 1275 points

Thank, it's good when i refresh but i have
>Initiate access to target: XDS-L3000949.
>Create XBAL object failed: Target connect failed
>Failed to create device object.
when i forced mass erase.

0 YiKai Chen over 9 years ago in reply to SkyMan

Guru 735695 points

Try to use another USB cable and test again.

0 SkyMan over 9 years ago in reply to YiKai Chen

Expert 1275 points

I tryed with another usb but it's the same, i connect the cc2650 after the CC-DEVPACK-DEBUGGER and i have " the selected device count not be identified"

0 YiKai Chen over 9 years ago in reply to SkyMan

Guru 735695 points

What's the version of your Flash Programmer 2?

0 SkyMan over 9 years ago in reply to YiKai Chen

Expert 1275 points

I have the same problem with CCS. The version of Flash Programmer 2 is 1.7.2 and CCS is Version: 6.1.3.00033. The version of XDS110 version windows drivers is 1.6.0.0 .

0 SkyMan over 9 years ago in reply to SkyMan

Expert 1275 points

I reinstall xds110 but it's works

0 YiKai Chen over 9 years ago in reply to SkyMan

Guru 735695 points

Try to install latest Flash Programmer 2 which is 1.7.3 to test again.

0 SkyMan over 9 years ago in reply to YiKai Chen

Expert 1275 points

I reinstall and tryed but nothing.. The same error. When i connect my sensortag and my devpack with the usb, the sensortag works but I can not connect to it.

0 YiKai Chen over 9 years ago in reply to SkyMan

Guru 735695 points

Run out of idea. Maybe ask for replacement at www.ti.com/.../faq-returns-and-refunds.page

0 SkyMan over 9 years ago in reply to YiKai Chen

Expert 1275 points

Ok thanks, i try with another pc and if it doesn't work, i ask for replacement.

0 YiKai Chen over 9 years ago in reply to SkyMan

Guru 735695 points

You are welcome and hope the problem would be solved when you test on another PC.

Bluetooth®︎

Bluetooth forum

Cc2650 Debug error XDS