• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 51 subscribers
  • Views 291 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Crash after flashing CC2640

Denis Ivanov79
Prodigy 40 points

Other Parts Discussed in Thread: CC2650

Why after flashing CC2650 blocked forever. Unlock impossible not to one of the methods described in the forum. It is necessary to unsolder the PCB CC2650.  What should be done to kill the flashing chip?!

  • 0
    TI__Guru** 105180 points
    Hello Denis,

    It sounds like you are having issues on a custom board? Can you confirm, and if so, post your schematic. Also, please review the HW checklist and troubleshooting articles on the TI BLE Wiki under "Design Resources". Many issues are related to improper crystal selection/placement, so that would be a good place to start.

    Best wishes