CC2640 Simple Peripheral BLE Stack 2.2 OAD

Michael Liesenberg85

Mastermind 7560 points

Other Parts Discussed in Thread: CC2640

Hi,

i followed the CC2640 OAD Guide and flashed it to my CC2640 custom board.

I noticed that once the device loses power the program wont restart or gets lost.

If i use FlashRom configuration this doesnt happend.

Why is the FlashOnly_OAD_Extflash configuration not keeping the program?

Reagrads,

Michael

over 9 years ago

0 Sean2 over 9 years ago

TI__Mastermind 33460 points

Hi Michael,

it sounds like you didn't load the bootloader project (BIM_extFlash), can you confirm you have loaded BIM, App, and Stack? Also be sure you are using RTOS in Flash.

0 Michael Liesenberg85 over 9 years ago in reply to Sean2

Mastermind 7560 points

Hi Sean,

its working now. I did Stack->App ->BIM and powering off the device and back is working.

Thank you,

Michael

Bluetooth®︎

Bluetooth forum

CC2640 Simple Peripheral BLE Stack 2.2 OAD