CC2650 Evaluation Module Kit

Hyunsoo Kim53

Intellectual 550 points

Other Parts Discussed in Thread: CC2650

I have couple questions regarding CC2650_4XS design found in http://www.ti.com/tool/cc2650emk.

1) What is the dielectric material used for the substrate?

2) I should be able to substitute DN007 with AN043, right?

3) Are there design files compatible with Altium?

4) Schematics and the layout show R11 and R12 but they have a value of 0. What is actually happening here?

over 8 years ago

0 A. Rebel over 8 years ago

TI__Genius 11740 points

Hi Hyunsoo,

Forwarded to our Hardware expert -

Regards,
-Rebel

0 Fredrik K over 8 years ago

TI__Guru** 106705 points

Hi Hyunsoo,

1) Regular FR4
2) Sure, an antenna is an antenna
3) No the designs are made in Cadence Allegro. You can definitely view the gerbers and layout though
4) R10/R11 are simply used to select either on-board PCB antenna or SMA connector. R12 is a placeholder for a potential capacitor/inductor for antenna tuning.

Cheers,
Fredrik

Bluetooth®︎

Bluetooth forum

CC2650 Evaluation Module Kit