CC2541 keyfob ble names

Do you have "12345" and "BLEBRDG" in your CC2541 project?

You can think my project is same as keyfob. There is only one device called "12345".
No idea where does "BLEBRDG" come from?

Are you sure this BLEBRDG connection is actually connected to your CC2541?

what do you mean? it shows connected. when I turn off the device, the connection is lost. The connection resumes when the device is turn on.

That confirms the connection is to your CC2541. Is your SW based on keyfob example?

if the devices adder same of others device ? you should ensure only one device work.

Hi Kevin,

In our KeyFobDemo project, the device name is set with

GAPRole_SetParameter( GAPROLE_SCAN_RSP_DATA, sizeof ( deviceName ), deviceName );

to Keyfobdemo. You can see the implementation in the file keyfobdemo.c.

can you explain the difference between "local name " in the scanRspData[] and "device name[] "in the gatt profile.can I remove the "generic access service" from the BLE project.maybe it will be solve this problem?

Hi Jake,

You can rad about services (including generic access service) in the Custom Profile SimpleLink Academy Module ( software-dl.ti.com/.../ble_01_custom_profile.html ).

I don't know how your phone app reads the device name. Normally you parse the scanr respons data for a name UUID, and read the following bytes for name length and name.