How to merge firmware/SP v1.5 to one bts file? - CC2564B - BLE - BlueZ -TIInit_6.7.x.bts - hciattach

T Tausch

Hello!

I am using the bts file (3365.TIInit_6.7.16.bts) from [https://e2e.ti.com/support/wireless_connectivity/bluetooth_cc256x/f/660/t/415318] under Raspbian Wheezy. Now I am trying to use CC2564B chip over UART on newest Raspbian Jessie with latest service pack v.1.5.

How can I merge theese three files to one bts file (TIInit_6.7.16.bts) to work with hciattach and BlueZ?

- initscripts-TIInit_6.7.16_bt_spec_4.1.bts
- initscripts-TIInit_6.7.16_ble_add-on.bts
- initscripts-TIInit_6.7.16_avpr_add-on.bts

I will be grateful if you can send me this information.

Best regards
Tino

over 8 years ago

0 Eyal Reizer over 8 years ago

TI__Mastermind 20285 points

Your query has been assigned to the relevant expert.
Please expect a responce later on.
BR,
Eyal

0 Tomer Kariv over 8 years ago in reply to Eyal Reizer

TI__Expert 5295 points

Hi,

You should not merge the 3 files. "initscripts-TIInit_6.7.16_bt_spec_4.1.bts" is the main BT script. This script can run with either "initscripts-TIInit_6.7.16_ble_add-on.bt" OR "initscripts-TIInit_6.7.16_avpr_add-on.bts". The reason is that either BLE OR AVPR (WBS, A3DP) can run at once.

So if you'd like to enable BLE, you should run "initscripts-TIInit_6.7.16_bt_spec_4.1.bts" and then "initscripts-TIInit_6.7.16_ble_add-on.bt". Same method for AVPR..

Regards,

Tomer

0 T Tausch over 8 years ago in reply to Tomer Kariv

Prodigy 30 points

Found Solution at:
e2e.ti.com/.../1932175

Bluetooth®︎

Bluetooth forum

How to merge firmware/SP v1.5 to one bts file? - CC2564B - BLE - BlueZ -TIInit_6.7.x.bts - hciattach