• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 52 subscribers
  • Views 296 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Feasibility of changing bond manager from Flash to SRAM for cc2640

neil sam
Intellectual 490 points
Other Parts Discussed in Thread: CC2640

Hi,

We are using CC2640 multi role ,we are running out of memory since stack is consuming close to 84k. We are planning to move bond manager related information from Flash to SRAM by keeping OSAL_SNV=1 in order to save 4k of flash. Also if we move the bond manager related information from flash to SRAM ,will BLE pairing and bonding will happen from stack . Please let us know will it be feasible or not, based on your opinion we have to do this experiment inorder to save 4k of flash. If its feasible please let us know the steps for doing this change.

Please provide your thoughts.

Regards, Neil