CC2546MODNEM pin out mapping for EM connectors

Dr. C. L. Fullmer

Other Parts Discussed in Thread: CC2564MODNEM

After perusing the user guides and other documents for the CC2564MODNEM eval board, I am unable to determine the pin mapping to the actual hardware.

I need to know how the pin outs are laid out, ie. which is pin 1, pin 2, etc on the connector itself.

over 8 years ago

0 Chen Loewy over 8 years ago

TI__Expert 5285 points

Hello Dr. C.L Fullmer

When you go to: www.ti.com/.../CC2564MODNEM Documents

you can download -

There you will have the schematics and all needed information.

BR,

Chen Loewy

0 Dr. C. L. Fullmer over 8 years ago in reply to Chen Loewy

Intellectual 435 points

thanks.. we did discover that as well, and have gone through it by now.. after enough effort it was possible to glean the simple answer -- the hard way.. a notation on the board, or in the user guide would be easy enough to make this all moot in the future...

Bluetooth®︎

Bluetooth forum

CC2546MODNEM pin out mapping for EM connectors