Mesh network CC2650?

Arielis

Other Parts Discussed in Thread: CC2650, CC2560

Hello,

Would you think that the CC2650 would support mesh networking in bluetooth. I am aware that TI are working on something but I was wondering that if I get the CC2650, I could get be able to do some mesh network if the SDK is updated?

Thank you

over 9 years ago

0 YiKai Chen over 9 years ago

Guru 735695 points

TI won't reveal or discussion roadmap on E2E forum so I suggest you to contact TI local representative to get this information.

0 Arielis over 9 years ago in reply to YiKai Chen

Prodigy 170 points

Actually, I need to know if with the launchpad CC2650, it would still be possible for example to use it if TI implement Mesh networking with BLE.

Or
should I just get the product from CSRMesh?

Thank you

0 YiKai Chen over 9 years ago in reply to Arielis

Guru 735695 points

I don't know TI's roadmap about BLE mesh. I can only suggest you to contact TI local representative to get information.

0 Christin Lee over 9 years ago in reply to Arielis

TI__Guru 56405 points

Hi,

As YiKai stated, please contact your TI local representative for the information.

0 Val 83 over 8 years ago in reply to Christin Lee

Intellectual 470 points

Now that BLE mesh has been officially released by the SIG group, will there be a support for this in CC2560 ?
Best regards,
Valentin

0 YiKai Chen over 8 years ago in reply to Val 83

Guru 735695 points

I know Nordic and Silcon Labs announce their BLE mesh SDK immediately. Look forward to hearing news from TI.

0 Val 83 over 8 years ago in reply to YiKai Chen

Intellectual 470 points

It is the same for us, we are planning to replace very soon zigbee by BLE Mesh in different products. We need a quick response for choosing the best available and functionnal chip.

Bluetooth®︎

Bluetooth forum

Mesh network CC2650?