This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Clarification on cc25xx and cc26xx ble modules

Other Parts Discussed in Thread: CC2650, CC2640, CC2540, CC2541, BLE-STACK

I am planning to build a ble application. I came to know about your ble modules and some of your modules meets my overall needs but I have some more requirements which your module datasheets does not specify.

I have looked on your cc2540, cc2640 and cc2650 modules. Can you please give a clear answer to my below questions with referring above ble's?

1. Can i get MAC address of incoming client request?

2. Need to store incoming mac address on a permanent storage(not cache). Do any of your above mentioned ble's have a permanent storage? If yes, please specify it.

3. Also need to compare incoming connection MAC address with permanent stored MAC address. Is it possible?

4. Like beacon, i need to show some data without connecting like service data? Can this be possible with your ble modules?

5. I need to get max current consumption at max transmission power in 10 seconds transmission time?

6. How to program these modules?

7. Can i get a development board with chip and oscillator antenna?