CC2640: for Debugger

Nitin Kanani

Part Number: CC2640
Other Parts Discussed in Thread: TMDSEMU110-U, , CC2630, LAUNCHXL-CC2650

Hi All,

I used cc2640 and cc2630 chip. so please share me which debugger is available for both chip-set. if i use TMDSEMU110-U is best or not. if not which one is best please share me

best regards

Nitin Kanani

over 8 years ago

0 YiKai Chen over 8 years ago

Guru 735685 points

You can buy LAUNCHXL-CC2650 and use the XDS110 Debugger on it to program/debug your CC2640/CC2630.

0 JXS over 8 years ago in reply to YiKai Chen

TI__Guru** 105180 points

In addition, you can refer to the "Complete Tools Overview" article on the TI BLE Wiki. This topic is also discussed in the sticky CC2640 FAQ at the top of this (BLE) forum.

Best wishes

0 Nitin Kanani over 8 years ago

Expert 1015 points

Hi all

xds100v3 debugger is supported in both model cc2640 and cc2630?

Best regards

Nitin Kanani

0 Christin Lee over 8 years ago in reply to Nitin Kanani

TI__Guru 56345 points

Yes. You can find all the supported debugger from the wikipage JXS mentioned " Complete Tools Overview "
TI BLE wiki
processors.wiki.ti.com/.../Category:BluetoothLE
Tools overview wiki
processors.wiki.ti.com/.../CC13xx_CC26xx_Tools_Overview

Bluetooth®︎

Bluetooth forum

CC2640: for Debugger