CC2650STK: Hardware revision

Kaka

Part Number: CC2650STK

Hi TI Experts,

I noticed that the SensorTag Hardware revision is updated.
So, would you please disclose the revision history up to time?

Best regards.
Kaka

over 9 years ago

0 YiKai Chen over 9 years ago

Guru 735695 points

Try to refer to the discussions in e2e.ti.com/.../1939188

0 Kaka over 9 years ago in reply to YiKai Chen

Guru 24520 points

Hi YK Chen,

Thank you for your information.
But I would like to know the minor version up from 1.30 to 1.3.2.
Do you know this differecnce?

Best regards.
Kaka

0 YiKai Chen over 9 years ago in reply to Kaka

Guru 735695 points

No, I don't know the difference. I suggest you can ask this question to Karl T in the discussions of e2e.ti.com/.../1939188

0 Karl T. over 9 years ago in reply to Kaka

TI__Expert 4060 points

Hi Kaka,

I answered the question in the other thread, but I'll copy the answer here as well:

From 1.3.0 to 1.3.1 there was a change of pre-loaded firmware to 1.2.0.

From 1.3.1 to 1.3.2, the on-board flash was changed from Winbond to Macronix. The buttons changed part number due to an end-of-life issue, but there are no functional changes.

Best regards,

Karl

0 Kaka over 9 years ago in reply to Karl T.

Guru 24520 points

Hi Karl,

Thank you four response.
I got it.

Best regards.
Kaka

Bluetooth®︎

Bluetooth forum

CC2650STK: Hardware revision