CC2564MODA: Bluetooth Hardware Evaluation Tool settings

Hi Hamada,

hamada said:

Q1)

When acquiring FCC certification,

What is the value to use when testing Power?

For TX test, the IC will be put in either Continuous TX or Packet TX mode. Typically it will be the max power the chip can output, but the testing house will be able to provide you the best answer on the current requirements.

hamada said:

Q2)

When acquiring FCC certification,

How can I set the receive mode parameters?

There are 3 modes required for the FCC tests :

Con. TX 

Packet TX/RX

Con. RX

The wiki links above cover which command to use and where/how to set parameters. The BHET also calls these commands evantually, so the parameters you see in BHET GUI are the same as mentioned in the links above. The testing house will have details on which parameters / modes to use for a particular test.

FYI, you can refer to the CC2564MODN/A FCC test report for reference. https://fccid.io/Z64-2564N

Best regards,

Vihang