CC2650STK: where can I find factory firmware

Joseph LIANG

Part Number: CC2650STK

Hi!

Where can I find factory firmware for CC2650STK? My sensortag is version 1.3.0. It just went brick and cannot be recovered by pressing both buttons for several seconds.

Thanks.

over 9 years ago

0 JXS over 9 years ago

TI__Guru** 105180 points

Please refer to Firmware Upgrade section in the SensorTag user guide, link on the TI BLE Wiki.

Best wishes

0 Joseph LIANG over 9 years ago in reply to JXS

Intellectual 300 points

Thanks for your reply.

I did that but after the recovery, I cannot perform firmware upgrade using my phone. The sensor view is working but the firmware upgrade is not.

0 YiKai Chen over 9 years ago in reply to Joseph LIANG

Guru 735705 points

You can try to use prebuilt SensorTag hex file in BLE Stack v2.2.1 to test again.

Bluetooth®︎

Bluetooth forum

CC2650STK: where can I find factory firmware