CC2640R2F: Eclipse IDE using Mac HW

SSF

Intellectual 2025 points

Part Number: CC2640R2F
Other Parts Discussed in Thread: CC2640, BLE-STACK

Hi Team,

Do we have any porting guidelines on using CC26xx with Eclipse on a Mac system? Or anything close to it that a customer can get ideas from?

Thanks!

over 8 years ago

0 JXS over 8 years ago

TI__Guru** 105180 points

Hello SSF,

The CC2640R2 SDK v1.0.0.22 is officially supported on Win7 SP1 host systems with IAR and CCS v7 IDEs. I'm not sure if anyone has adapted this SDK to work on the system you list but I'll let others chime in.

Best wishes

0 SSF over 8 years ago in reply to JXS

TI__Intellectual 2025 points

Hi,

Thanks for the clarity. Would the customer have better success with CC2640 SDK maybe? As opposed to R2

0 JXS over 8 years ago in reply to SSF

TI__Guru** 105180 points

There is an entry in the sticky CC2640 FAQ at the top of the BLE forum with a link to a procedure for running the BLE-Stack v2.2.1 SDK on Linux. This may be helpful for non-Win installations, including MacOS.

Best wishes

Bluetooth®︎

Bluetooth forum

CC2640R2F: Eclipse IDE using Mac HW