CC2650STK: BLE Speaker using LED Audio DevPack?

Markel Robregado

Guru 86765 points

Part Number: CC2650STK
Other Parts Discussed in Thread: CC2650, , CC2650RC

Hi,

I just want to know if I connect a LED Audio DevPack to CC2650 SensorTag, that it can function as a Bluetooth Speaker?

- kel

over 8 years ago

0 YiKai Chen over 8 years ago

Guru 735695 points

CC2650 is BLE chip so it won't function as classical Bluetooth speaker even with a LED Audio DevPack.

0 Markel Robregado over 8 years ago in reply to YiKai Chen

Guru 86765 points

Hi Yikai,

At sensortag files, I see sensortag_audio.c and sensortag_audio.h. Inside sensortag_audio.c there are C functions for audio streaming like this below. How do I try that out? It does not seem that the sensortag has a speaker or a microphone attached to it.

HIDAdvRemote_startStreamingVoice()

I am thinking I will run the sensortag example program for CC2650 Launchpad with the sensortag_audio.c and connect a Audio Booster Pack. But, I do not know yet if CC2650 Launchpad is pin compatible with Audio Booster Pack.

www.ti.com/.../cc3200AUDBOOST

- kel

0 YiKai Chen over 8 years ago in reply to Markel Robregado

Guru 735695 points

There is a MIC on CC2650STK so you can download sensortag_audio into your CC2650STK to test it. You can refer to to processors.wiki.ti.com/.../CC2650RC_UG to see how CC2650RC connect to SensorTag App or a Desktop. You can do the same test with CC2650STK.

Bluetooth®︎

Bluetooth forum

CC2650STK: BLE Speaker using LED Audio DevPack?