How to build a BLE project from the beginning?

Miguel Castro Vieira

Other Parts Discussed in Thread: BLE-STACK

Hi,

I have been using CCS and TI-RTOS in some applications and at this moment i would like to include the BLE libraries and files, like iCall, GATT and GAP. I was trying to introduce this files manually by simply copy them from a project example but without success. Do you know if there are another way or a correct way to do that?

Best Regards,

Miguel

over 8 years ago

0 Sean2 over 8 years ago

TI__Mastermind 33460 points

Hi Miguel,

There many required files and layers for the BLE-Stack. Instead of adding these files to your project. We recommend starting with a BLE-Stack sample application (for example simple_peripheral or simple_central) and add your RTOS code to that.

0 Miguel Castro Vieira over 8 years ago in reply to Sean2

Intellectual 835 points

Hi Sean,

Thank you for your reply. I agree with you, the problem is that when i try to rename a project I always get an error on CCS. That way, How do I change a example name according to my needs?

Best Regards,
Miguel

0 Sean2 over 8 years ago in reply to Miguel Castro Vieira

TI__Mastermind 33460 points

Hi Miguel,

Have you tried to follow these steps?

Note that you will need to rename your stack project as well and may need to clean and re-build both projects.

Bluetooth®︎

Bluetooth forum

How to build a BLE project from the beginning?