RTOS/CC2640: How do I interfaces an SD Card to the CC2640?

Roman Kuleshov

Intellectual 520 points

Part Number: CC2640

Tool/software: TI-RTOS

This is the SD Card break out board: https://www.adafruit.com/product/254

There is a document for the MSP TI MCU: http://www.add.ece.ufl.edu/4924/docs/MSP430_SD.pdf

Is there something similar for the CC2640?

https://www.adafruit.com/product/254

over 8 years ago

0 Christin Lee over 8 years ago

TI__Guru 56345 points

On our old EVM SmartRF06 Board, there is micro SD slot, however, we don't have SPI driver support for that.
If you want to use it, you will have to implement your own SPI driver for accessing the SD card.

0 Roman Kuleshov over 8 years ago in reply to Christin Lee

Intellectual 520 points

Is there an example of such code somewhere in the TI resource explorer? Or somewhere else?

0 YiKai Chen over 8 years ago in reply to Roman Kuleshov

Guru 735685 points

As I know, there is no such example code.

Bluetooth®︎

Bluetooth forum

RTOS/CC2640: How do I interfaces an SD Card to the CC2640?