CC1350: Simple BLE Broadcaster project isn't working.

Vinay Dubey35

Part Number: CC1350

Hi there,

I am trying to implement simple BLE broadcaster project on my CC1350 launchpad. I've imported the project titled "simple_broadcaster_cc1350lp_app" from BLE SDKv2.02 into my CCS workspace. After building and programming the CC1350 launchpad, I'm not getting any BLE signal that is broadcasted by it on my smartphone. I'm using simple BLE scanner app on my android phone.

What would be the possible issue? Help is required.

Also, please guide if I'm doing anything wrong.

over 8 years ago

0 YiKai Chen over 8 years ago

Guru 735685 points

Do you also download Stack project into your CC1350?

0 Vinay Dubey35 over 8 years ago in reply to YiKai Chen

Intellectual 280 points

Yes.. I downloaded that project into CC1350.

0 YiKai Chen over 8 years ago in reply to Vinay Dubey35

Guru 735685 points

Do you use TI ARM compiler v5.2.6 to build the example?

0 Vinay Dubey35 over 8 years ago in reply to YiKai Chen

Intellectual 280 points

Yes,
Previously I was getting the warning of old compiler version. Now, I've downloaded the TI ARM compiler v5.2.6 for building this example still I am facing the same problem.

0 YiKai Chen over 8 years ago in reply to Vinay Dubey35

Guru 735685 points

I just use CCS7 to test simple_broadcaster on my LAUNCHXL-CC1350 and everything works fine. Do you use CCS7?

0 Vinay Dubey35 over 8 years ago in reply to YiKai Chen

Intellectual 280 points

Hi Yikai,

I am using CCS v6.2.0 for programming the board currently. Should I try CCS v7 ?

0 YiKai Chen over 8 years ago in reply to Vinay Dubey35

Guru 735685 points

Yes, I suggest you to try it on CCS 7.

0 Vinay Dubey35 over 8 years ago in reply to YiKai Chen

Intellectual 280 points

I tried programming it through CCS 7. Still I'm not getting any BLE advertisements on my phone.

Bluetooth®︎

Bluetooth forum

CC1350: Simple BLE Broadcaster project isn't working.