CCS/CC2640R2F: How can i start developing.

kishan mandaliya

Part Number: CC2640R2F
Other Parts Discussed in Thread: CC2640, CC2650

Tool/software: Code Composer Studio

I want to developing software part of coding for Bluetooth LE(CC2640) module.but i don't know how should i start and also have Software development kit.

over 9 years ago

0 Christin Lee over 9 years ago

TI__Guru 57665 points

Hi,

You can take a look at our simplelink academy training and start from there. Even though the training is currently only available on CC2650/CC2640 device, but the concept of our SW solution is the same.

You can download the training here :
software-dl.ti.com/.../overview.html

0 kishan mandaliya over 9 years ago in reply to Christin Lee

Prodigy 110 points

Thank you so much!!! Chiristin Lee.

And I am good in C programming i want developing all functionalities for Bluetooth LE.so please tell me what are the algorithm following for development ? and which sequences following into the main() function for calling other functions(Like BIOS_start().).

once again thank you !.

0 Christin Lee over 9 years ago in reply to kishan mandaliya

TI__Guru 57665 points

Hi,

Our BLE stack comes as a library. We don't support developing the stack from scratch. But you can take at look at one of our examples in github
github.com/.../beacon_rfdriver
to see how to use RF driver to implement a beacon.

You can take it from there and make your own stack if you want.

0 kishan mandaliya over 9 years ago in reply to Christin Lee

Prodigy 110 points

Hi,

Is it necessary to create RTSC project for developing Bluetooth LE or else ccs project could be work or not? please give me some reference for RTSC project and what is difference between RTSC and ccs project?

0 Christin Lee over 9 years ago in reply to kishan mandaliya

TI__Guru 57665 points

I am not sure what you meant by RTSC. Where did you see this content?

Bluetooth®︎

Bluetooth forum

CCS/CC2640R2F: How can i start developing.