CC2640R2F: 7x7 Application Circuit

user4917449

Part Number: CC2640R2F

Hi TI,

Now I'm trying to make the CC2640R2 separate from the LAUNCHXL. However, when I'm referring to the CC2640R2 manual, the manual only shows the 5x5 Application Circuit and the 4x4 Application Circuit.

So, where should I find the 7x7 Application Circuit?

Thanks.

over 9 years ago

0 Fredrik K over 9 years ago

TI__Guru** 106705 points

Hi,

The reference designs are found here: www.ti.com/.../toolssoftware . The 7ID design is for the 7x7 package.

You can also use the CC2640R2 LaunchPad design files found here: www.ti.com/.../launchxl-cc2640r2 (design files section).

Cheers,
Fredrik

0 user4917449 over 9 years ago in reply to Fredrik K

Intellectual 875 points

Thanks! And that helps.
Best Regards

Bluetooth®︎

Bluetooth forum

CC2640R2F: 7x7 Application Circuit