SMARTRF06EBK: SmartRF06 pin mapping

Prachi Patki

What are the pins for external analog input voltage on SmartRF06 Evaluation Board? Can we use RF 2.5 and RF 2.6 which are internally connected ALS Power and ALS output pins for Ambient light sensor

over 8 years ago

0 Zahid Haq over 8 years ago

TI__Mastermind 25035 points

Hi Prachi,

You have to look at the datasheet which pins are analog capable:
www.ti.com/.../swrs158b.pdf

Then match your EM board signals:
www.ti.com/.../cc2650em-7id-rd

to the SmartRF06 signals:
www.ti.com/.../SMARTRF06EBK

Best wishes

0 Prachi Patki over 8 years ago in reply to Zahid Haq

Intellectual 285 points

Hello Zahid,

To find the EM board signal ,Which document should I follow?
Is it the technical reference manual : www.ti.com/.../swcu117g.pdf

Similarly for the SmartRF06 signals?which document should I follow

Thanks in advance

0 Fredrik K over 8 years ago in reply to Prachi Patki

TI__Guru** 106705 points

Hi Prachi,

In the second link scroll down to design files and open the EM schematic. In the third link open the SmartRf06EB User´s Guide, at the end you will find the schematic for that board.

Cheers,
Fredrik

Bluetooth®︎

Bluetooth forum

SMARTRF06EBK: SmartRF06 pin mapping