RTOS/LAUNCHXL-CC2650: No source available for "0x10004618"

Hi Mano,

This is normal. The PC is probably in a wait state. If you want to debug a specific section, you should set a breakpoint.

Hi Marie,
Thanks for your valuable reply,

I need to advertise my peripheral device. but its not advertising..
When i am debugging - its getting struck in errno = ICall_dispatcher(&args.hdr);
its calling from - "return ICALL_ERRNO_UNKNOWN_THREAD;"
the calling function..!!

/* Send the message */
errno = ICall_sendServiceMsg(src, ICALL_SERVICE_CLASS_BLE,   --------------------------->failed step 1
ICALL_MSG_FORMAT_3RD_CHAR_TASK_ID, msg);

if (errno == ICALL_ERRNO_SUCCESS)
{
ICall_GapCmdStatus *pCmdStatus = NULL;

errno = waitMatchCS(matchCSFn, (void **)&pCmdStatus); --------------------------->failed step 2
if (errno == ICALL_ERRNO_SUCCESS)
{
uint8 status = pCmdStatus->hdr.hdr.status;

// Free command status
ICall_freeMsg(pCmdStatus);

return status;
}
}

static ICall_Errno waitMatchCS(ICall_MsgMatchFn matchCSFn, void **msg)      --------------------------->failed step 3
{
if (ICall_threadServes(ICALL_SERVICE_CLASS_BLE))
{
/* Blocking ICall is not allowed for BLE Stack thread, and hence
* it's disabled.
*/
return ICALL_ERRNO_UNKNOWN_THREAD;   --------------------------->failed step 4
}

return ICall_waitMatch(ICALL_TIMEOUT_FOREVER, matchCSFn, NULL, NULL, msg);
}

}

errno = ICall_dispatcher(&args.hdr);  -------------------------->failed step 4

 

 

 

the above image  shows that debugged

Inside this function = static bStatus_t sendWaitMatchCS(ICall_EntityID src, void *msg, ICall_MsgMatchFn matchCSFn)

"waitMatchCS(matchCSFn, (void **)&pCmdStatus);" is not giving any return response.

inside "WaitMatchCS" function its struck in return "ICALL_ERRNO_UNKNOWN_THREAD;"

Could you help me - Why my program got struck here please?

Hi Mano,

Which example are you using?

What compiler are you using? (Please make sure it's TI ARM Compiler 5.2.6, see 2.6.3.1 Configure CCS in http://www.ti.com/lit/swru393 .)

Hi Marie,

Thanks for your valuable reply.

Here i am using TI ARM Compiler 5.2.6 only.

could help me more on this Please?

Hi Mano,

Did you program both the app and the stack project (according to 2.6.3.3.3 Compiling and Downloading in http://www.ti.com/lit/swru393 )?

What version of CCS are you using?

Hi Marie,

Thanks for your Valuable reply.

I am using CCS Version - 7.10.00016.

Waiting for your reply..

Hi Mano,

Did you make any changes to the code?

HI Marie,

Thanks for your reply.

I did't modified inside the code.
But i modified in Properties. Because - i am using cc1350lp Board. So i modified the CC13XXWARE path.