• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 51 subscribers
  • Views 831 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2640: Direct Test Mode of CC2640 for certification

Nomo
Guru 16800 points
Part Number: CC2640
Other Parts Discussed in Thread: BLE-STACK

Hello,

Can Direct Test Mode be used for TELEC certification?
My customers are considering using "Host Test project" for TELEC certification.
I want to know the project is useful for the certification.

Best Regards,

Nomo

  • 0
    TI__Guru** 105180 points
    Hello,

    Yes, you can use Host Test project for certification test. Please see the Certification section on the BLE Wiki page. In addition to DTM, there are also modem extension commands that can be used for regulatory certification. Refer to the TI Vendor Specific HCI Guide in the BLE-Stack SDK.

    Best wishes