CC2650STK: Magnetometer Example

Kaustubh Kulkarni

Part Number: CC2650STK
Other Parts Discussed in Thread: CC1350STK,

Hello all,

I am new to the CC2650STK / CC1350STK and BLE SDK. I would like to use the magnetomerter sensor; measure the magnetic field and send it to the receiver by using BLE. Could anyone tell me how to start with the programming ? I did not find any sample example for the MPU-9250 sensor.

Thank you in advance.

over 8 years ago

0 YiKai Chen over 8 years ago

Guru 735695 points

You can download/install BLE Stack 2.2.1 and refer to SensorTag example in BLE Stack. You can also refer to SensorTag user guide at processors.wiki.ti.com/.../CC2650_SensorTag_User's_Guide

0 Kaustubh Kulkarni over 8 years ago in reply to YiKai Chen

TI__Intellectual 1040 points

Hello Chen,

Thank you for the quick reply.

I think the SensoTag example in the BLE stack is the demo example right?
Could you please tell me is there any example specific to the movement sensor only like temprature sensor example available in the stack ?
Thank you in advance.

0 YiKai Chen over 8 years ago in reply to Kaustubh Kulkarni

Guru 735695 points

There's no dedicated example for movement sensor.

Bluetooth®︎

Bluetooth forum

CC2650STK: Magnetometer Example