CC2540: cc2540 network processor config

SRAVANTHI KANDI

Part Number: CC2540

I started development on cc2540 network processor configuration. i am not getting sufficient information about network processor configuration. can you please send me the information that how to write application and profiles on external mcu.

As iam using custom hardware platform, is there is necessary to change hal.board.cnfg file?

over 8 years ago

0 JXS over 8 years ago

TI__Guru** 105180 points

You can find the TI Vendor Specific HCI Guide PDF in the Documents folder of the SDK. We do not provide guides for developing external Bluetooth LE applications using NWP, however, you can use the API guide and knowledge of the BT protocol to implement your application.

I'm not able to find the "hal.board.cnfg " file in our SDK. Is this a file you created?

Best wishes

0 SRAVANTHI KANDI over 8 years ago in reply to JXS

Prodigy 230 points

sorry it is not hal.board.cnfg, it is hal_board_cfg.h

0 SRAVANTHI KANDI over 8 years ago in reply to SRAVANTHI KANDI

Prodigy 230 points

how to use the host test app in the ble stack v1.21 for custom boards.. the default settings in the host test program is enough or anything we need to change? if i use the unchanged program no response in the btool...

Bluetooth®︎

Bluetooth forum

CC2540: cc2540 network processor config