CC2650STK: Piet@ExperTronics.com

Piet Vaes

Intellectual 420 points

Part Number: CC2650STK
Other Parts Discussed in Thread: CC2650, , BLE-STACK

First of all where to download the firmware version 1.5 and second one how to resolve the error (see attachment)

Best Regards,

Piet

over 8 years ago

0 Marie H over 8 years ago

TI__Guru* 82431 points

Hi Piet,

Do you mean the 1.50 SDK? You can download it here: www.ti.com/.../SIMPLELINK-CC2640R2-SDK

You should take a look at the properties of the relevant attribute. You can read more about attributesand permissions here: dev.ti.com/.../

0 Piet Vaes over 8 years ago in reply to Marie H

Intellectual 420 points

Dear Marie,

I am working on the TI SensorTag CC2650 and not the CC2640R2 or is this the same product!
No I don't mean 1.50 SDK, but firmware version 1.5 for the TI SimpleLink Multi-Standard SensorTag CC2650STK

Thanks,

Piet

0 Marie H over 8 years ago in reply to Piet Vaes

TI__Guru* 82431 points

Hi Piet,

You can find the latest software for the CC2650 Sensortag here: www.ti.com/.../ble-stack (Ble-Stack 2.2.1).

0 Piet Vaes over 8 years ago in reply to Marie H

Intellectual 420 points

Dear Marie,

I downloaded before and this morning but still the same result. can you tell me which version of the firmware this is. I know this is the lastest BLE stack, but i need the latest firmware for the CC2650STK.

Thanks in advance

Piet

0 Marie H over 8 years ago in reply to Piet Vaes

TI__Guru* 82431 points

Hi Piet,

When you download the BLE-Stack, the latest compatible version of TI-RTOS is bundled with it.

Where did you get the version number 1.50 from?

0 JXS over 8 years ago in reply to Piet Vaes

TI__Guru** 105180 points

Hi Piet,

As a supplement to Marie's question above, SensorTag firmware versions are listed in the SensorTag User Guide on the TI BLE Wiki.

Best wishes

Bluetooth®︎

Bluetooth forum

CC2650STK: Piet@ExperTronics.com