CC2640R2F: Generating custom TX test patterns

Chris Lande

Expert 6525 points

Part Number: CC2640R2F

I would like to generate the following continuous TX test patterns with the CC2640R2F:

'00001111'

'01010101'

PRBS9

Can this be done using SmartRF Studio?

Please will you indicate the best way to do this regardless of the method?

Thanks.

over 7 years ago

0 Fredrik K over 7 years ago

TI__Guru** 106705 points

Hi Chris,

Use HCI_LE_TransmitterTestCmd: dev.ti.com/.../group___h_c_i.html

Regards,
Fredrik

0 Chris Lande over 7 years ago in reply to Fredrik K

TI__Expert 6525 points

Thanks for the prompt reply. I would like to do this via SmartRF Studio.

I see two commands in the in the 'Command View' window:

CMD_TX_TEST
CMD_BLE_TX_TEST

Will one of these commands allow me to do this? If so please will you outline the field parameters required.

Regards,
Chris.

0 Fredrik K over 7 years ago in reply to Chris Lande

TI__Guru** 106705 points

Hi Chris,

No, you cannot call those commands directly from Studio, they are used for code export.

If you program the board with the BLE HostTest project, you can use BTool to call the HCI commands.

Regards,
Fredrik

Bluetooth®︎

Bluetooth forum

CC2640R2F: Generating custom TX test patterns