RTOS/CC2640R2F: NVS region SPLITTING

stebin tharakan

Part Number: CC2640R2F

Tool/software: TI-RTOS

Hai all,

Am using CC2640R2 board and am working on NVS. NVS is working fine with single region.like am using 8-14 kB location to NVS.Now i want to use another one so is this posiible to use 2 NVS regions in NVS??

is there any supporting document for this??

Thanks,

Stebin J Tharakan

over 7 years ago

0 IUsedToBeARealPerson (M-W) over 7 years ago

TI__Guru 58425 points

Hi,

It should be possible, what you need to do is to add another region to the NVS configuration in the board file.
That would include another entry in in the NVSCC26XX_HWAttrs array and corresponding changes in NVSCC26XX_HWAttrs. You also need to add the new region to the NVS name enum in the board header file.

Have a look at the NVSCC26XX.h file documentation, it contains some hints on how you could setup the board file.

0 stebin tharakan over 7 years ago in reply to IUsedToBeARealPerson (M-W)

Intellectual 890 points

ok thanks

Bluetooth®︎

Bluetooth forum

RTOS/CC2640R2F: NVS region SPLITTING