CC2564MODNEM : to pair a bluetooth module

andy Park

Prodigy 40 points

Other Parts Discussed in Thread: CC2564MODNEM

제품 번호 : CC2564MODNEM

I use cc2564modnem and Arduino Uno.

I am trying to pair a Bluetooth module, but I do not know what to do.

So the ultimate goal is to have two Bluetooth devices communicate with each other.

I want to hear your advice.

thank you..

over 8 years ago

0 Eyal Reizer over 8 years ago

TI__Mastermind 20285 points

Sorry,

Please open another thread in english.

BR,
Eyal

0 andy Park over 8 years ago in reply to Eyal Reizer

Prodigy 40 points

Sorry,

please see you again.

Andy, park

0 dale over 8 years ago

TI__Expert 6335 points

Andy,

Depending on the host processor you are using, you can find useful Getting Started guides on the CC256x wiki page. What kind of communication do you plan on having between the two devices?

0 andy Park over 8 years ago in reply to dale

Prodigy 40 points

UART communication and 3-wire protocol. The goal is that the inputs and outputs of both Bluetooth modules appear on the serial monitor.

thank you very much.

0 dale over 8 years ago in reply to andy Park

TI__Expert 6335 points

Which host processor are you using for the CC256x? Have you downloaded the appropriate version of the stack and looked at the sample applications?

Bluetooth®︎

Bluetooth forum

CC2564MODNEM : to pair a bluetooth module